Start a new topic
Answered

E-30 Calls Viking

When I press the call button on my E-30, I hear two beeps and then it calls out to Viking.  Why?


Best Answer

This normally means that dip switch #3 on the back of the E-30 is set to the Off position, which keeps it in the programming mode.  Dip switch # 3 should be set to the On position for normal operation.  If dip switch # 3 is set to On and the E-30 behaves that way (calls Viking), the dip switch is probably faulty.

1 Comment

Answer

This normally means that dip switch #3 on the back of the E-30 is set to the Off position, which keeps it in the programming mode.  Dip switch # 3 should be set to the On position for normal operation.  If dip switch # 3 is set to On and the E-30 behaves that way (calls Viking), the dip switch is probably faulty.

Login or Signup to post a comment