(2 wires from the entry phone indicates this is similar to an E-30, for example).
Dial tone must be provided to the C-1000B on terminals 4,5.
(Only ONE entry phone is supported in this mode). Connect to “Doorbox 1” terminals 8,9.
Programming:
Configure the C-1000B for “Analog Station Mode”. (This is described in the product manual on page 4, section H).
To access programming, connect a phone or butt set to terminals 4 and 5, set the “Talk Battery” switch to ON, turn DIP Switch 2 ON, and go off-hook. 2 beeps should be heard. (if this keeps repeating, this feature has already been configured, STOP here).
After the 2 beeps, enter “*5”. 2 more beeps should be heard. Hang up the phone or butt set, turn DIP Switch 2 OFF and the “Talk Battery” switch OFF.
Press the call button to test the operation and it should work properly. The person that answers the call can dial “**” to operate the door or gate.